Power Chuck and Soft jaws
FEATURE
- No torsion of workpieces will be caused during machining because heavy duty holding knife made of light aluminium is applied to ensure high speed cutting and stable performance.
- Stable zigzag design work against high pressure and provide long tolerance and high accuracy at the same time.
- This type can be used for either hollow or closed center and the size of which depends on the connection part.
FEATURE
- The best choice for irregular-shaped workpieces. This type of power chuck is applicable for square and other special-shaped auto parts.
- Special wedge mechanism works well against high pressure and provide long tolerance with high accuracy and long duration.
- This type can be used for either hollow or closed center and the size of which depends on the connection part.
FEATURE
- This type with the features of heavy pressure cutting, and 4-jaw linking is suitable for the heavy cutting of square or round shaped work pieces.
- Special wedge mechanism works well against high pressure and provide long tolerance with high accuracy and long duration.
- This type can be used for either hollow or closed center and the size of which depends on the connection part.
FEATURE
- The Soft Jaws are suitable for CNC lathe.
- Many different sizes to suit all the popular power chucks, such as Kitagawa, Howa.
- According to different process term, customers can choose varied sizes and more convenient, and avoiding unnecessary correction movement.
- We categorize the Soft Jaws into :
• Standard type.
• 120 degree pointed.
• 90 degree pointed.
• 60 degree pointed.
FEATURE
- The Soft Jaws of Extra-High Type are suitable for CNC lathe.
- Many different sizes to suit all the popular power chucks, such as Kitagawa, Howa.
- Soft jaws of Extra-High Type are suitable for the length of workpiece is longer, such as 100mm length will need Soft Jaws of Extra-High Type with over 70mm Hight which will increase the accuracy and stability of production process.
- We are available from over 8 inch which over 200mm height.
- We categorize the Soft Jaws of Extra-High Type into :
• Standard type.
• 120 degree pointed.
FEATURE
- This is used in CNC Lathe.
- Soft jaws of Extra-Wide Type are suitable for thinner, deform easily, and bigger covering rang of parts enable to decrease deformation and increase the accuracy.
- Such as outer dia. 60mm will need 60mm of Extra-Wide Type of Soft Jaws.
- Many different styles and sizes to suit all the popular power chucks, Such as Kitagawa, Howa.
FEATURE
- This is used in CNC Lathe.
- Soft jaws of Extra-Long Type are suitable for parts with bigger outer dia.
- Such as outer dia. 250mm will suitable to use Soft Jaws of Extra-Long 150mm.
- Many different styles and sizes to suit all the popular power chucks, Such as Kitagawa, Howa.
FEATURE
- This is used in CNC Lathe.
- Soft jaws of Extra-Long Type are suitable for parts with bigger outer dia.
- Such as outer dia. 250mm will suitable to use Soft Jaws of Extra-Long 150mm.
- Many different styles and sizes to suit all the popular power chucks, Such as Kitagawa, Howa.
FEATURE
- The Hard Jaws are suitable for CNC lathe.
- Many different sizes to suit all the popular power chucks,Such as Kitagawa, Howa.
FEATURE
- To connect power chuck and soft jaws , adjusted with different brands.
- We categorize the T-Nuts into :
- Standard type (Fig 1)
- Special type (Fig 2)
- 6" Soft Jaws use for 8" chuck, 8" Soft Jaws use for 10" chuck
- 10" Soft Jaws use for12" chuck, 12" Soft Jaws use for 15" chuck
- 10" Soft Jaws use for15" chuck.
- Special type (Fig3)
- 10" Soft Jaws use for 8" chuck.