Carbide Drill-G400
Carbide High Performance Drill-3×D
| Cutting Effected Length | • 3×D |
| Dimension | • Sim. DIN6537 • 140 Degree Tip Angle • 25~35 Degree Helix Angle • Without Coolant Hole • S-Fire Coating |
| Tolerance | • d h7 • D h6 |
| Material | • ALLOY STEELS • STAINLESS STEELS • CAST IRON • TITANIUM STEELS |
| more... | |
Carbide High Performance Drill-5×D
| Cutting Effected Length | • 5×D |
| Dimension | • Sim. DIN6537 • 140 Degree Tip Angle • 25~35 Degree Helix Angle • Without Coolant Hole • S-Fire Coating |
| Tolerance | • d h7 • D h6 |
| Material | • ALLOY STEELS • STAINLESS STEELS • CAST IRON • TITANIUM STEELS |
| more... | |
Carbide High Performance Drill with Coolant-3×D
| Cutting Effected Length | • 3×D |
| Dimension | • Sim. DIN6537 • 140 Degree Tip Angle • 25~35 Degree Helix Angle • With Coolant Hole • S-Fire Coating |
| Tolerance | • d h7 • D h6 |
| Material | • ALLOY STEELS • STAINLESS STEELS • CAST IRON • TITANIUM STEELS |
| more... | |
Carbide High Performance Drill with Coolant-5×D
| Cutting Effected Length | • 5×D |
| Dimension | • Sim. DIN6537 • 140 Degree Tip Angle • 25~35 Degree Helix Angle • With Coolant Hole • S-Fire Coating |
| Tolerance | • d h7 • D h6 |
| Material | • ALLOY STEELS • STAINLESS STEELS • CAST IRON • TITANIUM STEELS |
| more... | |
Carbide High Performance Drill with Coolant-7×D
| Cutting Effected Length | • 7×D |
| Dimension | • WIN 407 • 140 Degree Tip Angle • 25~35 Degree Helix Angle • With Coolant Hole • Four Margins • S-Fire Coating |
| Tolerance | • d h7 • D h6 |
| Material | • ALLOY STEELS • STAINLESS STEELS • CAST IRON • TITANIUM STEELS |
| more... | |
Carbide High Performance Drill with Coolant-12×D
| Cutting Effected Length | • 12×D |
| Dimension | • WIN 412 • 140 Degree Tip Angle • 25~35 Degree Helix Angle • With Coolant Hole • Four Margins • S-Fire Coating |
| Tolerance | • d h7 • D h6 |
| Material | • ALLOY STEELS • STAINLESS STEELS • CAST IRON • TITANIUM STEELS |
| more... | |
You are here: